Magna Cut

The innovative MagnaCut magnetic Pipe and Plate Cutting Machine with remote controlled Torch Arm is an excellent choice when cutting a variety of pipe or plate wall thicknesses. Available in 2 models, MagnaCut attaches to any magnetically receptive surface. MagnaCut II can be easily identified by its green top utilizes permanent magnets and is designed for bare and lightly coated pipe. The MagnaCut XM identified by its red cover utilizes powerful rare earth magnets to adhere the machine to pipes with a coating up to .015” (.4mm) thick.

MagnaCut's speed and direction as well as torch arm speed direction can be remotely controlled from the motor control box minimizing the risk of injury to the operator. MagnaCut has a travel speed of 2” (51mm) to 32” (813mm) per minute around the pipe or along the plate. The MagnaCut has a pipe and tube cutting range of 6 5/8” (168mm) to unlimited on the outer diameter of the pipe and 24” to unlimited on the inside diameter of the pipe. MagnaCut cuts pipe or plate from 3/8” (10mm) to 2” (51mm) thick. MagnaCut's powerful drive motor enables the machine to cut both vertical plate and “I” beam. When extreme accuracy is needed a Guide strip can be made from a length of raw angle iron.

Whether you are a contractor, fabricator, or maintenance welder cutting bare or coated pipe or plate, MagnaCut is the machine for you. MagnaCut effortlessly cuts the pipe or plate cleanly and quickly producing a quality cut with little or no grinding time. MagnaCut comes in a rugged storage case with all service keys need for operation